FCP "Tiras-16.64P"
The basis of the fire alarm system is a receiving and controlling the fire device, "Tiras-16.64P" (base). Expanding the number of zones systems (base number - 16 zones) is due to the capacity of devices, which are used as receiving-control fire devices "Tiras-16P" or "Tiras-8P" which have 16 zones, 8 zones, respectively. Maximum number of zones in the system - 64 (with base unit). In addition to the base unit and building units in the system includes relay modules MRL-2, MRL2.1 and MRL-8. The connection between components of the system by means of interface RS485, which may have a total length of 1,360 meters.
Описание, характеристики продукта
|
Main features:
1.The device works with different types of detectors in the zones of: 2-wire, 4-wire and simultaneously with the two types in one zone; 2.Simple and intuitive interface control unit with LCD display; 3.The device has several conditions of formation of the condition "fire": the distribution of one detector in the zone ,of the two detectors in the zone of the two detectors at different locations, with automatic re-inspection of fire in the zone in a short period of time; 4.Power memory for storage of log events to 256 events; 5.It is possibility to connect MCA (module of digital dialer) for the transmission of notices to the remote monitoring fire station in the format "Contact-ID"; 6.Thereis an input to control serviceability of the additional power supply system; 7.There are relay outputs of detectors and sounders power to allow connection of external power supplies. The device has two compound parts: the base unit and control panel (VPK 16.64-P, then - VPK). VPK is used to control basic device and its display condition. VPK has a large 4-line LCD display, keyboard, programming device and software access levels (codes), indicators of the basic condition of operation. Connection between VPK and the base unit is by 2 lines connection RS485 (main and stand-by), which provides high reliability connections. MRL-8 module is used to increase the number of controlled outputs of the system. Each module has 8 relay outputs with re-handling contact (normally closed, normally open). The maximum number of MRL-8 in the system - 2. Each of the outputs can be configured to operate in the specific zone. Puiz-1 module is used to organize one direction of the gas, aerosol or powder fire. |
Technical characteristics:
1.Information capacity of 16 -64 zones
2. Operational temperature range from - 50C to +40 0 C at a relative humidity of 93%.
3. Overall dimensions:
Base unit – 330 mm x 410 mm x 95 mm
VPK- 215 mm x 155 mm x 35 mm
4.Level of protection ІR30
5.Average life – at least 10 years
6.Power supply (187-242) V / 50 Hz.
7.Output voltage (9.5 - 13.8)
8.Battery stand-by power 12 V, 18 A / h.
9.Automatic charger ,100% charge - no more than 72 hours.
Current consumption from the battery
"on duty" - 250 mA, the "fire" - 280 mA.
VPK: all Modes - 100 mA.
Protecting the battery from deep discharge is present, turning off the load at 10.5
Load current release of "+12", mA, not more than 2000;
The voltage in the zones (11,0-12,5);
Exit "notification" (relay) not more than 5A;
Interfaces MRL - 2.1 - 2 ; MCA, MCA-GSM - 1 , RS485 - expansion devices, RS485 - 2 for VPK
1.Information capacity of 16 -64 zones
2. Operational temperature range from - 50C to +40 0 C at a relative humidity of 93%.
3. Overall dimensions:
Base unit – 330 mm x 410 mm x 95 mm
VPK- 215 mm x 155 mm x 35 mm
4.Level of protection ІR30
5.Average life – at least 10 years
6.Power supply (187-242) V / 50 Hz.
7.Output voltage (9.5 - 13.8)
8.Battery stand-by power 12 V, 18 A / h.
9.Automatic charger ,100% charge - no more than 72 hours.
Current consumption from the battery
"on duty" - 250 mA, the "fire" - 280 mA.
VPK: all Modes - 100 mA.
Protecting the battery from deep discharge is present, turning off the load at 10.5
Load current release of "+12", mA, not more than 2000;
The voltage in the zones (11,0-12,5);
Exit "notification" (relay) not more than 5A;
Interfaces MRL - 2.1 - 2 ; MCA, MCA-GSM - 1 , RS485 - expansion devices, RS485 - 2 for VPK
Similar products
The device has two zones for connecting non-address fire detectors with constant current control, which can connect up to detectors.
The device is designed for continuous clock operation as part of fire
alarm systems in buildings with controlled climatic conditions.
|
Documentation
Photos
|
|
|
|
|
|
